Pedals

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Get back on the road with original equipment pedals. GENUINE REPLACEMENT PARTS Keep your bike operating as it should. PRODUCT DETAILS - Dialed fit for kid sized feet - Sold in pairs

Dual-sided, SPD-compatible clipless MTB pedals with a perfect balance between durability and weight CLIP INTO CONFIDENCE Clip into the control and efficiency of clipless pedals. The Kovee Elite Clipless Pedals offer fully adjustable release tension that lets you dial in the right feel for your ride, while adding the confidence and control of clipless pedals. When you're after a balance of weight, durability, and style, reach for Kovee Elite. PRODUCT DETAILS - Dual-sided, SPD-compatible XC MTB clipless pedals - Fully adjustable clip in & clip out tension - Durable forged body with anodized plates for added durability - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware

Get back on the road with original equipment pedals. - Dialed fit for kid sized feet - Sold in pairs

Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench

The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package. - One side SPD, one side platform - Two-sided flexibility and performance - Ideal for trekking - Customize the entry and release tension settings - 392 grams - Concave cleat clearance on platform side - High-grip pins - Sealed cup and cone bearings

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Versatile Road Cleat For All Types of Riders For anyone unsure about which cleats to choose, the SM-SH11 are a great starting point. With their large float range and centered pivot point, Shimano’s Yellow SPD-SL cleats allow the toes to point in a wide range of angles and provide more room for error during set-up while still delivering an efficient connection between rider and bike. So if you're new to cycling, experience knee pain, lack flexibility, or simply don’t know where to begin, these cleats are your best bet. FEATURES: - SM-SH11 Yellow SPD-SL cleats come stock with most Shimano SPD-SL pedals and are a great choice for the majority of cyclists. They feature a six-degree float range (three degrees in each direction), which allows for free movement and low joint stress while still creating a solid connection between rider and bike. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls - Off-Bike Friendly: Cleat size and shape provide stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines injection molded main body with grip-enhancing TPU tips that are durable and maintain long lasting pedal engagement

Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

The Cleat Shim-Spacer helps compensate for leg length discrepancies.

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g

The Delta pedal is upgraded with a stainless abrasion plate to decrease direct scratch to pedal body, which increases durability. In addition to that, the material has been changed to thermoplastic which makes it lighter weight. The E-PR73ST features low stack height which allows greater ground clearance as well as increased pedaling efficiency. - 85 x 94 mm - Fiberglass-reinforced thermoplastic, enclosed mechanism, tension adjustable with gauge - 9/16"

Dimension Mountain Sport Pedals. - Molded nylon pedal body - Accepts toe clips - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly - Weight: 290g

The Bontrager City Pedal Set delivers comfortable foot support and reliable traction to keep you confidently connected to your bike. It features reflective edges on the front and rear to add visibility in low-light conditions, and a strong, durable, and easily serviceable chromoly axle to keep you rolling smoothly ride after ride. - Nylon concave body supports and stabilizes foot while pedaling - Anti-slip texture for traction and confidence - Front and rear reflective panels add visibility in low-light conditions - Durable chromoly spindle with long- lasting, serviceable bearings - Installs with 6mm hex key or flat 15mm pedal wrench

Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance. Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench

Get that fresh cleat feel These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals. Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals - Directly compatible with Bontrager Comp Road pedals - Set includes 1 pair

Comfort and Confidence The inForm BioDynamic design of the Satellite city pedal delivers ultimate pedaling comfort. The wide, stable platform is designed to support your foot while you're pedaling, and the grippy texture provides confident traction to keep you going. Reflector wrap on each pedal ensures all-around visibility. - Large, concave platform for support and stability - Anti-slip texture for traction and confidence - 270-degree reflectivity for all-around visibility - inForm BioDynamic design for comfort and support while pedaling - Spindle: 9/16-inch

A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 18mm high - Spindle diameter: 9/16-inch - Weight: 352 grams

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick.

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)

The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)