Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Surly Stainless-Steel Chainring (110mm BCD)
$30.00 - $60.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.
Surly Stainless-Steel Chainring (94mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly MWOD Bash Guard
$45.00
This aluminum bash guard is compatible with Surly's MWOD cranksets. Keep rocks and roots away from your chainring teeth and ride on.
Surly MWOD Inner Chainrings (Stainless)
$28.00 - $30.00
Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.
Surly MWOD Outer Chainring
$65.00
Surly's MWOD chainrings convert your Mr. Whirly crankset into an offset mountain double crank. In simple terms, they allow your fat bike to run an extra wide rear tire and rim combo (for example, 4.7-inch tires on 100mm rims or 82mm rims on your Pugsley) while avoiding chain-on-tire rub. This outer chainring bolts directly to the inner ring with four chainring bolts.
Surly Narrow Wide Chainring
$65.00
An issue many people ran into when they began using 1x setups was chain retention with the front chainring. In the beginning of the 1x movement, many companies dealt with this by using aftermarket chain keepers that somehow bolted to the frame. Many people discovered that using a narrow-wide chainring in conjunction with some type of 'clutch' rear derailleur helped abate or eliminate these chain-jumping issues. Narrow-wide rings use alternating tooth profiles that more positively engage the chain and help control a deflecting chain in bumpy conditions. Your friends at Surly have partnered with SRAM to bring you stainless steel X-Sync chainrings. Stainless Steel is durable. This durability is pretty useful when you're talking about the one ring that is bearing the brunt of all your miles.
Surly O.D. Chainring
$65.00
The new chainrings are stainless steel and have improved ramps, gates, and pins for better shifting performance.
Origin8 Holdfast Oval Direct 1x Chainring
$57.99 - $75.99
Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
All-City Cross Chainring
$40.00 - $48.00
These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible
Chromag Sequence X-Sync Chainring
$69.00
Chromag's Sequence chainring uses X-SYNC technology licensed from SRAM for unmatched chain retention. So now, no matter what kind of riding you do, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. •104mm BCD
Race Face Turbine 10-Speed Chainring Set (104/64 BCD)
$129.99
• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used • Double chainrings bolts are included with all Race Face chainring sets
Wolf Tooth Components Shimano M9000/M9020 Chainring
$64.95 - $69.95
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
TruVativ Trushift Steel Chainring
$21.57 - $25.17
- Trushift middle and outer rings (32T, 36T, and 44T) feature shift ramps and pins - Ring Position/Type: Outer - Drivetrain Speeds: 8, 9, 10, 11 - Material: Steel
All-City 314 Messenger Ring
$55.00
Named for a 17-year Minneapolis messenger veteran, Tim Gellerman, whose messenger call name was 3.14 (Pi). The 314 Messenger ring is manufactured from the same high-grade, 7000-series alloy as the All-City 612 Track ring, but fits 130mm B.C.D. cranks. - Chain Compatibility: 1/2-inch x 1/8-inch
All-City 612 Track Ring
$55.00
612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish. - BCD: 144 - Chain Compatibility: 1/2-inch x 1/8-inch
FSA Pro Road Triple Middle Chainring
$33.99 - $38.99
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! - These rings fit any 120 BCD crankset or spider - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 64/104 Chainring
$59.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Cyclocross Chainring
$79.95 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components 102 BCD Chainrings For XTR M960
$79.95
The XTR M960, now 4 generations old in the XTR lineage, is an oldie-but-goodie crankset and Wolf Tooth aims to meet your 1x needs with these rings. Compatibility: - These rings only fit on the M960 crankset in the middle ring position. They are a 102mm BCD. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention)
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$69.95 - $79.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$69.95 - $79.95
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components 104 BCD Chainrings
$59.95 - $64.95
The 104 BCD chainring was Wolf Tooth’s first product ever and it is the most common bolt pattern on double and triple cranksets. Wolf Tooth’s patented Drop-Stop tooth design is the best available anywhere. Compatibility: - These rings fit any 104 BCD crankset - 30 tooth rings require chainring bolts that are 7-10mm long. All other sizes require single ring specific bolts that are ~6mm long. - 30t x 104BCD ring is the only QUARQ power meter compatible 30t ring available! - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$79.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Cyclocross and Road Chainrings
$79.95 - $89.95
Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! Compatibility: - These rings fit any 120 BCD crankset or spider. - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Origin8 Holdfast Direct 1x Chainring
$53.99 - $73.99
Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
Wheels Manufacturing Inc. Individual Chainring Spacer
$17.84 - $20.00
- For chain and derailleur alignment - 20 per bag
Origin8 Alloy Non-Ramped Chainrings - 130 BCD/5-Bolt
$31.99 - $35.99
Origin-8's Alloy Non-Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They feature an attractive and corrosion-resistant black anodized finish.
Race Face Cinch Direct Mount Narrow-Wide Chainring
$69.99 - $74.99
Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface
Page 1 of 6 Next page